logowanie ustawienia

Exta - TEMPERATURE REGULATOR RTM-30

Information

Documentation

Declaration of conformity

Product family:

Name

TEMPERATURE REGULATOR

Reference no.

RTM-30

Description

The temperature regulator operation is based on heating/regulation curve which we obtain by means of choosing points including both the expected temperature and the reference temperature, by choosing a ready made curve or by changing options for room regulation. The regulator preserves the temperature with the heating source suitable for the reference point (e.g outer or inner temperature), chosen during configuration phase. Regulation algorithm causes the heating costs lower and the same gives full comfort of room and weather regulation. The regulator uses two sensors for proper operation. There is also a possibility of extending its existing connection cable up to 50 m with a cable section of 0,2÷2,5 mm2. The reference temperature sensor can be replaced with a standard resistor, which causes one sensor operation as in the standard temperature regulation. The regulator is a perfect solution in every situation we want to be sure there was a full factor ciculation e.g.: cooling systems or heating systems, but also in situations where suitable temperature difference is necessary for preserving best conditions with maximum low costs e.g.: hot water circulation. Replacing one temperature sensor with a standard resistor has the effect of constant regulation around one point in accordance with the adjusted curve, close to the chosen points. Replacing one temperature sensor with a potentiometer with similar functions has the effect of changing a universal regulator into a standard temperature regulator with difference regulation possibility by means of curve and hysterisis. It allows to control, e.g., the heating source in such a way its temperature is higher than the adjusted one including difference corresponding e.g. the ambient temperature loss through windows, etc.
COMMERCIAL DATA (RTM-30)
Dimensions doublemodular (35 mm) 90 x 35 x 66  mm
Packaging 32  [pcs]
Weight 180  g
TECHNICAL DATA (RTM-30)
Input rated voltage 85 ÷ 265  V AC
Max output voltage 250  V
Temperature regulation range 5 ÷ 95  ºC
Category of use AC1
Max power of relay 4000  VA
Relay contacts arragement 2NO/NC
Output relay curent 16  A
Rated power consumption 60  mA
Protection degree IP20
Mounting szyna  TH35 (PN-EN 60715)

Informujemy, iż w celu zapewnienia jak najlepszej wygody w przeglądaniu naszych stron www, dostosowania ich do indywidualnych potrzeb użytkownika a także dla celów reklamowych , statystycznych oraz uwierzytelniania korzystamy z informacji zapisanych za pomocą plików cookies na urządzeniach końcowych użytkowników. Plikami cookie użytkownik może zarządzać za pomocą zmiany ustawień swojej przeglądarki internetowej.

Dalsze korzystanie z naszych serwisów internetowych bez zmiany ustawień dotyczących cookies oznacza, użytkownik akceptuje politykę stosowania plików cookies, która szczegółowo jest opisana w naszej Polityce Prywatności

Akceptuj i zamknij